รีวิว Gigabyte GA-970 Gaming G1 ครบทุกพอร์ตสุดยอดทุกฟีเจอร์ 970 Gaming

สวัสดีเพื่อนๆชาว it-reborn ทุกท่าน ทิ้งช่วงไปนานกับการออกเมนบอร์ดรุ่นใหม่จากค่าย AMD กลับมาคราวนี้ Gigabyte ได้จับเทคโนโลยีใหม่ใส่มาเพียบไม่ว่าจะเป็น Killer E2200 AMP-UP Audio USB 3.1 Type A&C Metal Shielding และ M.2 Connector ซึ่งทั้งหมดนี้มาในบอร์ดราคา 3,XXX บาท ชื่อรุ่นของเจ้าตัวนี้คือ Gigabyte GA-970 Gaming G1!!

 

Spec GA-970-Gaming

AM3+ Socket:
    1. AMD AM3+ FX processor
    2. AMD AM3 Phenom™ II processor/ AMD Athlon™ II processor

    (Please refer “CPU Support List” for more information.)

  • Hyper Transport Bus
    1. HyperTransport™ 3.0
    2. Support up to 5200MT/s
  • Chipset
    1. North Bridge: AMD 970
    2. South Bridge: AMD SB950
  • Memory
    1. 4 x DDR3 DIMM sockets supporting up to 32 GB of system memory
      * Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed.
    2. Dual channel memory architecture
    3. Support for DDR3 2000(O.C.)/1866/1600/1333/1066 MHz memory modules
      * To support a DDR3 1866 MHz (and above) memory, you must install an AM3+ CPU first.
    4. Support for Extreme Memory Profile (XMP) memory modules

    (Please refer “Memory Support List” for more information.)

  • Audio
    1. Realtek® ALC1150 codec
    2. TI Burr Brown® NE5532 operational amplifier
    3. High Definition Audio
    4. 2/4/5.1/7.1-channel
    5. Support for S/PDIF Out
  • LAN
    1. Rivet Networks Killer™ E2201 LAN chip (10/100/1000 Mbit)
  • Expansion Slots
    1. 1 x PCI Express x16 slot, running at x16 (PCIEX16)
      * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.
    2. 1 x PCI Express x16 slot, running at x4 (PCIEX4)
      * The PCIEX4 slot shares bandwidth with the M2F_10G connector. The PCIEX4 slot will operate at up to x2 mode when a PCIe SSD is installed in the M2F_10G connector.
    3. 2 x PCI Express x1 slots
      (All of the PCI Express slots conform to PCI Express 2.0 standard.)
    4. 2 x PCI slots
  • IDE ATA

    South Bridge:

    1. 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 SATA and PCIe x2/x1 SSD support)
    2. 6 x SATA 6Gb/s connectors
    3. Support for RAID 0, RAID 1, RAID 5, RAID 10, and JBOD
      * Refer to “1-8 Internal Connectors,” for the supported configurations with the M.2 and SATA connectors.
  • Multi-Graphics Technology
    1. Support for 2-Way AMD CrossFire™ technology
  • USB

    South Bridge:

    1. 12 x USB 2.0/1.1 ports (6 ports on the back panel, 6 ports available through the internal USB headers)

    VIA® VL805 chip:

    1. 4 x USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header)

    ASMedia® USB 3.1 Controller:

    1. 1 x USB Type-C™ port on the back panel, with USB 3.1 support
    2. 1 x USB 3.1 Type-A port (red) on the back panel
  • Internal I/O Connectors
    1. 1 x 24-pin ATX main power connector
    2. 1 x 8-pin ATX 12V power connector
    3. 1 x M.2 Socket 3 connector
    4. 6 x SATA 6Gb/s connectors
    5. 1 x CPU fan header
    6. 2 x system fan headers
    7. 1 x power fan header
    8. 1 x front panel header
    9. 1 x front panel audio header
    10. 1 x S/PDIF Out header
    11. 1 x USB 3.0/2.0 header
    12. 3 x USB 2.0/1.1 headers
    13. 1 x serial port header
    14. 1 x Clear CMOS jumper
    15. 1 x audio gain control switch
  • Rear Panel I/O
    1. 1 x PS/2 keyboard/mouse port
    2. 1 x USB Type-C™ port, with USB 3.1 support
    3. 1 x USB 3.1 Type-A port (red)
    4. 2 x USB 3.0/2.0 ports
    5. 6 x USB 2.0/1.1 ports
    6. 1 x RJ-45 port
    7. 1 x optical S/PDIF Out connector
    8. 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In, Line Out, Mic In)
  • I/O
    1. iTE® I/O Controller Chip
  • H/W Monitoring
    1. System voltage detection
    2. CPU/System temperature detection
    3. CPU/System/Power fan speed detection
    4. CPU overheating warning
    5. CPU/System/Power fan fail warning
    6. CPU/System fan speed control
      * Whether the fan speed control function is supported will depend on the cooler you install.สามารถดาวน์โหลด Bios Update Gigabyte 970 Gaming G1 ได้ที่นี่
  • BIOS
    1. 2 x 32 Mbit flash
    2. Use of licensed AMI UEFI BIOS
    3. Support for DualBIOS™
    4. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
  • Unique Features
    1. Support for APP Center
      * Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.
      @BIOS
      Ambient LED
      Cloud Station
      EasyTune
      Game Controller
      Smart TimeLock
      Smart Recovery 2
      System Information Viewer
      USB Blocker
    2. Support for Q-Flash
    3. Support for ON/OFF Charge
    4. Support for Smart Switch
    5. Support for Xpress Install
  • Bundle Software
    1. Norton® Internet Security (OEM version)
  • Operating System
    1. Support for Windows 10/8.1/7
  • Form Factor
    1. ATX Form Factor; 30.5cm x 24.4cm
it-reborn
Facebook Comments